← BlogBy Sergiu Biriș

Connect Garmin to Claude: build your IRONMAN 70.3 plan

Yes. Connect Garmin to Claude through Memory.fit, and Claude can plan your IRONMAN 70.3 build from your real swims, rides and runs, then send each session to your watch.

Connect Garmin to Claude: build your IRONMAN 70.3 plan

Yes. Connect Garmin to Claude through Memory.fit, and Claude can plan your IRONMAN 70.3 build from your real swims, rides and runs, then send each session to your watch.

Connect your Garmin in the Memory.fit app and add one Memory.fit address to Claude. Claude can then read your activities, sleep, HRV and resting heart rate. When Claude plans a structured session, Memory.fit sends it to your Garmin, so the workout is on your watch when you head out the door.

This guide covers the setup step by step, the prompts that work well for a 70.3 build, and what happens on your watch. It also explains plainly what Claude does and what Memory.fit does.

Connect Garmin to Claude, the setup video

Watch the setup (1:03): Connect Garmin to Claude on YouTube. The video shows connecting Garmin in Memory.fit, adding Memory.fit to Claude, then asking Claude to send a workout to a Garmin. The chats in it are examples, and Claude's answers depend on your data.

What Claude can see once your Garmin is connected

Memory.fit connects to Garmin directly. You sign in with your Garmin account in the Memory.fit app and approve Memory.fit, and Claude never sees your Garmin password. From then on, Claude can read:

  • Activities with power, heart rate and cadence (your swims, rides and runs)
  • Sleep
  • HRV and resting heart rate
  • Steps

Garmin shares your data from the day you connect it. Older sessions, from the last 90 days, can come in through Health Connect on Android if Garmin Connect writes to it and you connect it too. After that, every new session arrives as your Garmin syncs.

Memory.fit reads your Garmin data and never changes it. The only thing it adds on the Garmin side is the structured sessions your AI plans, which go to your Garmin Connect calendar and then to your watch.

What Claude does and what Memory.fit does

This is the part people usually ask about first, so here it is plainly.

Claude plans. Claude reads your history, asks what you want, and writes the plan: the sessions, the targets and the notes. When it wants to replace or remove something you already have, it asks you first.

Memory.fit keeps the data and the plan. It holds your Garmin history and the plan Claude wrote, shows it in the Memory.fit app with Claude's name on each change, and sends structured sessions to your watch. You can undo any change from the app's Inbox.

Memory.fit recommends nothing itself. It never tells you how to train. Every session, target and adjustment comes from your AI, and you can always see who wrote what. If you later try ChatGPT or Grok Bot, they read the same history and the same plan, so you don't start over.

How to connect Garmin to Claude, step by step

The whole setup takes a few minutes and works on any Claude plan.

Step 1: Connect Garmin in the Memory.fit app

  1. Install Memory.fit from Google Play. iPhone is coming: join the iPhone waitlist.
  2. In the Memory.fit app, open Settings, then Health data.
  3. Tap Garmin, then Connect.
  4. Sign in with your Garmin account and allow Memory.fit.

Activities and sleep arrive as your Garmin syncs, and the sessions your AI plans go to your watch.

Step 2: Add Memory.fit to Claude

  1. On claude.ai or in the Claude desktop app, add Memory.fit as a connector. The address is https://api.memory.fit/mcp. The Install in Claude button on the Garmin and Claude setup page fills it in for you.
  2. Tap Add, then sign in to Memory.fit.
  3. In a chat, turn on Memory.fit under + › Connectors.

Claude adds new connectors on the web or desktop. On a phone, use a computer once, and after that Memory.fit works in the Claude phone app too.

How to build an IRONMAN 70.3 training plan with Claude

A 70.3 build is three sports, plus strength, plus recovery, plus the long days where fueling matters. That is a lot to keep in one chat, which is why it helps that Claude can read the sessions themselves instead of screenshots.

Start by telling Claude the facts it can't read from your watch: your race date, how many hours you can train in a normal week, which days are fixed (work, family, a pool that is only open in the morning), and anything it should know about injuries. Then let it read the rest.

Prompts that work well:

  • "Read my last six weeks from Garmin. How much have I been swimming, riding and running each week, and what does my week usually look like?"
  • "I'm racing a 70.3 on June 14 and I can train about 9 hours a week. Build my next four weeks around my real week, with one brick each weekend."
  • "Build a 4 x 8 min threshold ride for Thursday at my FTP and send it to my Garmin."
  • "Did my sleep and HRV this week justify Saturday's long ride? If not, what would you change?"
  • "Plan Sunday's long run with the fueling for it, and put the session on my watch."

How Claude structures the block, how hard each week is and how it balances the three sports is Claude's planning, based on what you tell it and what it reads. If you work with a coach, tell Claude the coach's plan comes first and ask it to fit around it.

How Claude's sessions get to your Garmin watch

Once Claude plans a structured session, Memory.fit sends it to your Garmin. It lands as a structured workout on your Garmin Connect calendar and syncs to your watch or Edge, with each step's target in your own zones and Claude's notes beside it.

  • What goes: run, bike, swim and strength sessions.
  • How far ahead: up to 90 days.
  • When the plan changes: if Claude moves or changes a session, the copy on your watch is updated.
  • After the session: your Garmin records it, it syncs back to Memory.fit, and Claude can compare what you did with what was planned.

This is the loop that saves the most time in a 70.3 build. You ask, Claude plans, the session is on your wrist, and next week's plan starts from what you actually did. See how sending workouts to your watch works for every device.

Adjusting the plan after a short night or a skipped session

Real weeks don't follow the plan. Because Claude can read your sleep, HRV and resting heart rate, you can ask it to adjust from the numbers instead of from memory:

  • "I slept under six hours. Look at my sleep and HRV and tell me whether to keep today's intervals."
  • "I skipped Wednesday's swim. Rework the rest of the week without stacking two hard days."
  • "I have a work trip Tuesday to Thursday with a hotel gym only. Replan those days."

Claude writes the change back to Memory.fit, the watch copy follows, and you can undo it in the app if you'd rather keep the original. Claude also runs scheduled tasks in the cloud that use your connectors, so you can ask for a weekly review every Monday.

Fueling the long days

The long ride and the long run are where a 70.3 plan meets fueling. Your AI can set the carbs per hour, fluid and sodium for each long session, and you see them on the session in the Memory.fit app. If you want to check its numbers against the research, read how many carbs per hour, by session and race length, or use the free Race Fuel Planner and Sweat Rate Calculator. For race day, race fuel plans cover IRONMAN 70.3 courses with their aid stations.

For more on the 70.3 side, see AI training plans for IRONMAN 70.3 and Memory.fit for triathletes.

FAQ: Garmin and Claude

Is there a Garmin connector for Claude?

Not from Garmin. The nearest official route is Claude's Apple Health and Health Connect links from Anthropic: US only, a beta in Claude's phone app, and they see only what Garmin Connect shares with Apple Health or Health Connect. Nothing goes back to your Garmin. Memory.fit is another route, a hosted MCP server: connect Garmin in the Memory.fit app, add one Memory.fit address to Claude, and Claude reads it, in every country.

Can Claude send workouts to my Garmin?

Yes. Once Claude plans a structured session, Memory.fit sends it to your Garmin, up to 90 days ahead, and a session your AI moves or changes is updated on the watch.

Does Memory.fit change my Garmin data?

No. Memory.fit reads your Garmin activities, sleep and HRV and never changes them. It only adds the sessions your AI plans to your Garmin Connect calendar.

Can Claude see my older Garmin workouts?

Garmin shares your data from the day you connect it. Older sessions from the last 90 days can come in through Health Connect if Garmin Connect writes to it and you connect it too.

Can I add it from the Claude phone app?

Not the first time. Claude adds new connectors on claude.ai or in the desktop app. After that, Memory.fit works in the Claude phone app too.

Can Claude read my Strava data?

No. Strava data shows in the Memory.fit app only, and by Strava's rules it never reaches an AI. Claude reads your Garmin data directly.

What does it cost?

Memory.fit is $9 a month or $69 a year, with 7 days free, for every device and every AI you connect (prices vary by country). Claude's own plan, if you have one, is separate.

Get started

Memory.fit is on Android now, and iPhone is on the waitlist. The MCP works today at https://api.memory.fit/mcp. Get the app, connect your Garmin, and ask Claude for your first 70.3 week. Full setup details are on the Garmin and Claude page.

GarminClaudeIRONMAN 70.3TriathlonMCPSend workouts to your watchGuides

Your next chapter starts with everything you've learned.

On Android now. iPhone is coming: join the waitlist and we'll email you the day Memory.fit is on the App Store.

No spam. One email when it's ready.

Get it onGoogle Play